reply on: Recover force closed channels \ stacker news ~lightning

pull down to refresh

21 sats \ 6 replies \ @npub1q67p49masrcjf__d7qaq6mwh0q OP 14 May \ parent \ on: Recover force closed channels lightning

Thanks for your suggestion:

How did you close them? Any errors or odd behavior at the time you closed/force closed?

I do not remember if and what error I got when trying to close-mutually, that's why I ended up force-closing the remaining three channels

Did you maybe clean out the node before closing not leave enough in the wallet for anchor fees?

No I did not clean out the node before closing these last 3 channels, leaving all the sats from the previous closed channels in there on the onchain wallet

Now, using:

lncli listchannels does not provide any output. Probably because have any active channels atm
lncli pendingchannels provide the following

{
    "total_limbo_balance": "0",
    "pending_open_channels": [
    ],
    "pending_closing_channels": [
    ],
    "pending_force_closing_channels": [
    ],
    "waiting_close_channels": [
        {
            "channel": {
                "remote_node_pub": "hidden",
                "channel_point": "hidden:0",
                "capacity": "43095473",
                "local_balance": "0",
                "remote_balance": "0",
                "local_chan_reserve_sat": "0",
                "remote_chan_reserve_sat": "0",
                "initiator": "INITIATOR_REMOTE",
                "commitment_type": "ANCHORS",
                "num_forwarding_packages": "0",
                "chan_status_flags": "ChanStatusRestored"
            },
            "limbo_balance": "0",
            "commitments": {
                "local_txid": "",
                "remote_txid": "",
                "remote_pending_txid": "",
                "local_commit_fee_sat": "0",
                "remote_commit_fee_sat": "0",
                "remote_pending_commit_fee_sat": "0"
            },
            "closing_txid": ""
        },
        {
            "channel": {
                "remote_node_pub": "hidden",
                "channel_point": "hidden:1",
                "capacity": "30000000",
                "local_balance": "0",
                "remote_balance": "0",
                "local_chan_reserve_sat": "0",
                "remote_chan_reserve_sat": "0",
                "initiator": "INITIATOR_REMOTE",
                "commitment_type": "ANCHORS",
                "num_forwarding_packages": "0",
                "chan_status_flags": "ChanStatusRestored"
            },
            "limbo_balance": "0",
            "commitments": {
                "local_txid": "",
                "remote_txid": "",
                "remote_pending_txid": "",
                "local_commit_fee_sat": "0",
                "remote_commit_fee_sat": "0",
                "remote_pending_commit_fee_sat": "0"
            },
            "closing_txid": ""
        },
        {
            "channel": {
                "remote_node_pub": "hidden",
                "channel_point": "hidden:0",
                "capacity": "10000000",
                "local_balance": "0",
                "remote_balance": "0",
                "local_chan_reserve_sat": "0",
                "remote_chan_reserve_sat": "0",
                "initiator": "INITIATOR_REMOTE",
                "commitment_type": "ANCHORS",
                "num_forwarding_packages": "0",
                "chan_status_flags": "ChanStatusRestored"
            },
            "limbo_balance": "0",
            "commitments": {
                "local_txid": "",
                "remote_txid": "",
                "remote_pending_txid": "",
                "local_commit_fee_sat": "0",
                "remote_commit_fee_sat": "0",
                "remote_pending_commit_fee_sat": "0"
            },
            "closing_txid": ""
        }
    ]
}

and lncli listunspent provide many UTXO

If some closing tx's are confirmed and you're just waiting on the timelock, you can power off the node and turn it on later to spend those UTXO's, it doesn't need to be online if you just want to keep your state for later use.

Ok it make sense, thanks. I'm just worried about the channels staying n that state forever! There's a way to check the status of the timelock?

45 sats \ 5 replies \ @justin_shocknet 14 May

The fact that they're waiting_close and not pending_force_close implies they weren't actually force closed (ui you used to do this may not have handled it correctly)

Try force closing one of them again with lncli closechannel txid vout --force and see if that changes things

There's a potential scan bug that could be at play too, if the force close doesn't change things the LL folks will be best to help https://github.com/lightningnetwork/lnd/issues/8560

Your funds don't appear to be in jeopoardy though, just don't panic and do anything dumb and you'll get your coin back eventually

21 sats \ 4 replies \ @npub1q67p49masrcjf__d7qaq6mwh0q OP 14 May

THat's great to hear. Thank you so much! Yeah for now I was just waiting to see if anything unfolded within the node.. but after a while I start questioning things and want to know why this is happening.

It's really weird that aren't force closing! how did you get to this conclusion?

wouldn't be better then to bump the fees as @TNStacker suggested?

In any case, the closing_txid is empty on all 3 channels (I did not delete anything else apart replacing the values on remote_node_pub and channel_point with hidden) and also the Uis (TH and RTL) does not provide me that info, so how can I (re)try to force close?

21 sats \ 3 replies \ @justin_shocknet 14 May

Because it's "waiting close", not "pending force close"

Since there's no closing txid there's nothing to bump

Use the command in my previous comment, the txid is the channel point and the vout is the :0 digit at the end of it (usually 0 but might be higher)

0 sats \ 2 replies \ @npub1q67p49masrcjf__d7qaq6mwh0q OP 14 May

tried the one that has vout = 1 and...

[lncli] rpc error: code = Unknown desc = cannot close channel with state: ChanStatusRestored

42 sats \ 1 reply \ @justin_shocknet 14 May

Gives you something to go on at least...

This is odd though since you didn't say it was a data loss / SCB closure, so its either the bug I mentioned before or something else altogether. You should take this to the discussion boards on the LND github to be safe.

My guess is they'll direct you here after further diagnosis: https://github.com/lightninglabs/chantools/blob/master/doc/zombierecovery.md

0 sats \ 0 replies \ @npub1q67p49masrcjf__d7qaq6mwh0q OP 14 May

Ok, this start to make sense now...

Also found this https://github.com/lightningnetwork/lnd/issues/7313 with the difference that it also has ChansStatusDataLoss so I assume the data on my side is not lost then 🤞

I'll update when I've any news

Thanks for now