pull down to refresh
101 sats \ 3 replies \ @Craylon_Tarvis 17 Jun 2023 \ on: Help Installing Graphene on Pixel 7 tech
Don't assume the factory cable delivers data. It may not.
Counting last night, I've tried maybe 4 or 5 different cable options now. None worked, but I still think it might be a cable issue. Any recommendations?
reply
Replying to this because in my case the process to install GrapheneOS was straightforward and I didn't have any problem.
I use a relatively old laptop which has a USB port which makes connections disconnect from time to time (I also think I have a too low electric current flowing through it). Typically I can't even plug a medium size hard drive and I had disconnection issues with a hardware wallet and a drone.
That being said, normally the cable delivered with the phone should work (white and thick cable in my case).
If you have the same kind of problem I have, then try to avoid to put pressure on the cable during the install, because if the USB port on the laptop is old it may lead to disconnections.
Do you have a device showing up with the command "adb devices"?
reply
Thanks for the reply. I was able to flash very easily on a Mac.
But, you raise good points for others.
You are correct, the white cable included with the Pixel 7 worked. It does carry data.
I assume you did a Windows install? If yes, the answer to your question is no : after I entered the command adb devices no device showed up. My windows laptop laptop, fyi, , is 2 or 3 years old but is running Windows 11.
reply