pull down to refresh
I finally managed to install the new electronic circuit in the RC car and it's working. It still needs some improvements, but the hardest part is over.
The new servo and speed controller I ordered just arrived. I've included a photo of the old SEC (Servo Electronic Control Unit) at the bottom to compare it to the old servo. I've decided to keep the old unit for the car I was working on. I'll use the new servo and SEC unit on a much larger BMW M6 I own. For the car I'm currently working on, I'll use batteries or a lower-power battery.
I burned out the servo and the speed controller overheated. I'm looking into buying new, more powerful ones since my battery is 7.4V and the servo was 6V.
Both receivers arrived yesterday, and I tried connecting everything. The servo burned out; the SEC didn't burn out, but it overheated. So I decided to buy a higher-capacity servo and a higher-capacity SEC.
Good morning. Today, Sunday, I was busy cutting, using a box cutter, to make room for the new servo.
In the photo, you can see the speed controller waiting for the Flysky receiver. I already have everything ready. The servo is in place, which was the most tedious part. In the next few days, I'll be uploading a photo a day until the receivers arrive. I ordered two to have in case of a breakdown. I have two servos and two more speed controllers.
#RC #Flysky #SEC #Servo #DIY #Batteries #Balancer
The batteries and the balance charger I didn't include have arrived. I had ordered them, and I'm still a bit short of the batteries.
#RC #Flysky #SEC #Servo #DIY #Batteries #Balancing
Ready to start setting up the site for the servo.
https://image.nostr.build/4f1dd027b19c85d547dbd3b493203fc8c82afaabba98c34da371e295fce40525.jpg
Here's the RC car I'm going to modify, although it's already assembled. I've already removed almost all of the electrical system. I've only left the original motor and the cables that go to the batteries. I'll soon be removing the battery box. I also need to make room to fit the new servo in place of the original.
You could try contacting someone who has some crypto in Staking and with what you earn in staking you send them € or $ and they give you the equivalent in USDT and then you convert it into Sats.
Si ves registrado llevo un tiempo pero la pereza de aprender y tener en la cabeza otras cosas. He ido dejandolo para mas adelante. me regalaron 1000 sats para iniciarme en esta app pero la ultima vez se me olvido con que habia iniciado al cuenta y pense que los habia perdido. Pero hoy he recuperado la cuenta.
Hello thanks you for this information. 👍