pull down to refresh

Yesterday, I received the ESCs and servos for my RC, but when I was in a hurry to connect them, I didn't realize I shouldn't connect the RC battery directly to the RC signal receiver, and it burned out. I've ordered two more signal receivers. So now I have two receivers, two servos, and two speed controllers or ESCs.
Here's the RC car I'm going to modify, although it's already assembled. I've already removed almost all of the electrical system. I've only left the original motor and the cables that go to the batteries. I'll soon be removing the battery box. I also need to make room to fit the new servo in place of the original.
reply
The batteries and the balance charger I didn't include have arrived. I had ordered them, and I'm still a bit short of the batteries. #RC #Flysky #SEC #Servo #DIY #Batteries #Balancing Ready to start setting up the site for the servo. https://image.nostr.build/4f1dd027b19c85d547dbd3b493203fc8c82afaabba98c34da371e295fce40525.jpg
reply
Good morning. Today, Sunday, I was busy cutting, using a box cutter, to make room for the new servo. In the photo, you can see the speed controller waiting for the Flysky receiver. I already have everything ready. The servo is in place, which was the most tedious part. In the next few days, I'll be uploading a photo a day until the receivers arrive. I ordered two to have in case of a breakdown. I have two servos and two more speed controllers. #RC #Flysky #SEC #Servo #DIY #Batteries #Balancer
reply