pull down to refresh

895 sats \ 16 replies \ @Alby 22 Aug
That's very useful feedback. Thanks a lot.
The bitcoin on-chain fees increased rapidly within a short amount of time (spiking by more than 500x). Channels may automatically close as a protective measure. This isn't something specific to Alby, it's a built-in failsafe mechanism within the Lightning Network itself, designed to keep your funds secure during unexpected network events.
Is there a way to recover my funds without opening another channel? No funds are lost and you don't need to do anything. Since this was a forced channel closure, your bitcoin will reappear in the savings balance of your Hub within 14 days.
Where's my savings account? Your savings account is your bitcoin onchain wallet. You find it on the "Node" page of your Hub.
reply
@CHADBot /eli5
reply
100 sats \ 4 replies \ @CHADBot 22 Aug bot
Sure thing! So, @felipe was worried because he couldn't find his savings or money after something called a "channel" closed on his Hub. He didn't want to open a new "channel" because it costs a lot and he was scared of losing more money.
Then, @Alby explained it like this - Sometimes, when the cost of doing things with bitcoin goes up really fast, these "channels" closes on their own to keep everything safe. It's like a seatbelt in a car that tightens when there's a sudden stop to keep you safe in your seat.
@Alby also told @felipe that his money isn't gone, it's just going back to his savings account in his Hub (it's like his piggy bank). This could take about 2 weeks. And he mentioned that @felipe's savings account is really his bitcoin wallet, which can be found on a page called "Node" on his Hub. So, Felipe doesn't have to worry about losing his money, it's just taking a little time to return to his piggy bank.
Made with ๐Ÿงก by CASCDR
reply
100 sats \ 0 replies \ @bumi 22 Aug
hey @CASCDR that's pretty cool. :)
reply
worried because he couldn't find his savings or money after something called a "channel" closed on his Hub
๐Ÿ˜‚๐Ÿ˜‚๐Ÿ˜‚๐Ÿ˜‚๐Ÿ˜‚
reply
118 sats \ 1 reply \ @cascdr 22 Aug
It really does explain like you're 5!
reply
I can even understand it. Iโ€™m going to go cry in happiness now.
reply
That is Bad Ass !
reply
Thanks! Check it out and give it a whirl. Commands in bio: https://stacker.news/CHADBot
reply
231 sats \ 0 replies \ @CHADBot 22 Aug bot
You have summoned CHADBot. Please zap this post 21 sats to receive service.
Made with ๐Ÿงก by CASCDR
reply
@CHADBot /what are you?
reply
This is a manual message.
I am a bot designed to provide useful or entertaining SN replies!
See full list of commands here: https://stacker.news/CHADBot. V1 is OUT:
  • Summarize a linked fountain.fm podcast
  • Explain Complex Tech
  • Advocate on behalf of your idea
  • Argue/promote people in the tone of trump!
Questions? Suggestoins? Reach out to @cascdr .
reply
21 sats \ 0 replies \ @Alby 23 Aug
What's next The bitcoin on your closed channel will become available again within 14 days in the Savings Balance on the "Node" page of your Hub. Users subscribed to Alby Cloud received a new channel for free. This was possible due to their monthly subscription and our collaboration with Megalith, the LSP (channel provider). If you are in need of re opening a channel urgently, you can do so following this guide.
reply
Thanks for coming here and give an explanation. Many noobs are starting with Alby Hub and do not understand fully how LN channels behave in high fee env.
Will be nice to add into Alby Hub more info about closed channels, so the user could see what really happen and how much time will take to recover their funds. Right now for a total new user to LN, this could look like a terrible situation where their funds just disappear and there's no way to recover (and we know that is not true).
reply
How can a beginner avoid the force closure, what are your tips ?
Also, why this happened to Alby Hub and not on the Phoenix wallet?
Cheers
reply
Channels across different lightning implementations can be better configured. Phoenix has the advantage that their LSP service has been built by the same team that build the mobile wallet. So both lightning implementations are well aligned. But you only can open channels to their LSP afaik. Alby Hub lets you choose the channel partner and allows you to open channels to several LSPs. That's why we are actively working with them better cross-implementation configurations.
reply
A forced closure doesn't automatically result in loss of funds? I thought that was one of the reasons people are still a bit unsure about using LN? (I'm a LN-noob)
Nevertheless, one has to pay the fees for a new channel again, which still hurts.
reply
1555 sats \ 1 reply \ @Murch 23 Aug
The underlying problem is that commitment transactions need to surpass the dynamic minimum mempool feerates of nodes in order to be admissible to mempools. When there is a huge spike in blockspace demand, mempools may overflow and begin evicting transactions. This may raise the bottom feerate of nodesโ€™ mempools beyond prenegotiated feerates of commitment transactions. Those commitment transactions would then no longer be able to reliably close channels unilaterally. Some node implementations therefore preemptively close channels on feerate spikes.
With the release of Bitcoin Core 28.0 we will get opportunistic package relay for child-pays-for-parent transaction pairs. This will allow Lightning Commitment transactions to be submitted into mempools even if their individual feerate is lower than nodesโ€™ dynamic mempool minimum feerates by sending them alongside a child transaction that raises the packageโ€™s feerate above the mempool minimum. Hopefully this work in Lightning implementations will progress quickly after the Bitcoin Core v28 release.
reply
Thanks for mentioning this! This could be a nice fix for all these crazy force closures. Let's see how is going.
reply
284 sats \ 0 replies \ @bumi 22 Aug
This happened due to this huge fee, short fee spike and an issue with some LSPs. It's actually a default lightning mechanism and a protective measure implemented in LDK. It's independent of Alby and happens across implementations. and it's a closure, the sats will become available in the savings balance.
we are investigating this and also collaborating with LSPs to see how this can be avoided in such a LSP relationship. It's independent of Alby and happens across implementations.
we will post an update later.
reply
18 sats \ 1 reply \ @flat24 22 Aug
Wow this is a total tragedy... a few months ago something similar happened to me with a channel I had on Blixt, fortunately there were not many SATS around 30,000 SATS. I tried to restore my wallet but my SATS never appeared in LN, nor onchain, simply all channel records disappeared along with the SATS.
reply
you need to wait a bit for a timeout, then they will become available again. I don't know the blixt wallet, but check it again
reply
10 sats \ 2 replies \ @bumi 22 Aug
Also opening a channel during such a fee-spike is not recommended. we should add a warning to users about that.
The mempool fees have come down again already (5sat/vB on the second block and used it to be 1500sat/vB). I'd still wait a bit more.
reply
I opened mine when fees were 2-3 sats/vB. Shame it still closes during short spikes. Iโ€™m not going to waste my sats on this again. Sats are like glue, the more you handle it, the more you lose
reply
understandable, though technically there is still a lot more to it than a "short spike". But did you get our email? we work hard with the LSPs to prevent this but we put this on auto-pilot for users, so you don't need to care.
reply
FOLLOW UP
I just got my funds back on the Savings Balance :)
Thanks for the support @Alby
reply
did you were able to withdraw those funds? Mine is not working. I wanted to switch the LN implementation of Alby Hub to LND so I have to swipe all the remaining funds from that node.
reply
Sorry about this. The withdraw function a bit broken (it didn't set aside enough fees to pay the onchain transaction) and will be fixed in 1.6.0 (released on github) which should also go out to Alby Cloud in the next few days.
reply
Also, if you don't use the wallet any more and have no channels, you can import the seed into Sparrow wallet and send the sats out from there (only recommended if you are not actively using Alby Hub)
reply
Yes I know that. I just wanted to be able to use as is (testing all functionalities) and also I tried to open a new channel with those onchain funds with no success. The wallet is locked.
But I will wait for new release and reset the node switching to LND backend. More testing. New apps like this must be intense tested and improved with feedback. I do not complain that is not workinng smooth from beggining, these are normal issues that must be informed to devs and give as much feedback is possible.
reply
I really appreciate that, thanks.
What do you mean by the wallet being locked? this does not sound good!
reply
locked - not being able to do any tx with it. I tried to look into logs (debug section), but there is not very detailed and seems to be ok. It's OK, if you already found the problem and will be fixed, no problem, will wait for the fix and test again. I really like this idea of Alby Hub and want to go discovering more about it. Will send also some more feedbacks.
reply
Thanks very much!
For the logs, you'd have to change the log level. This will be difficult currently in Alby Cloud, but if you run Alby Hub self-hosted you can change the LDK_LOG_LEVEL environment variable (e.g. LDK_LOG_LEVEL=1 to enable trace logs).
Hey @DarthCoin! Sorry for the late reply
I was not able to withdraw the funds as well. I just tried it and it throws the following error:
I'll try again with the new version of Alby Hub Desktop and I'll let you know if it works
reply
@DarthCoin Withdraw on v1.6.0 works fine :)
reply
Glad to hear. ๐Ÿค™
reply
@Alby can you give more details? Indeed same happen to my Alby hub with a LDK backend. I think was due to these crazy high mempool fees going on. It really sucks when you buy an inbound channel and they FC on you... Also is really confusing, no info about the closing channel and where the sats are going, to which onchain wallet, closing tx, no way to trace that closing channel.
reply
33 sats \ 2 replies \ @bumi 22 Aug
This happened due to this huge fee, short fee spike and an issue with some LSPs. It's actually a default lightning mechanism and a protective measure implemented in LDK. it's a closure and the sats will become available in the savings balance.
we are investigating this and also collaborating with LSPs to see how this can be avoided in such a LSP relationship.
we will post an update later.
reply
The fee negotiating process between LN implementations is terrible. And that could trigger this nightmare. LN devs should really consider to fix or change this behavior. I know is a protection mechanism in LN protocol, but it doesn't make any sense to get fucked so easily for no reason.
People are paying sats to buy those LSP channels and closing them just like that will have a huge impact in using this kind of nodes and LN in general.
reply
49 sats \ 0 replies \ @bumi 22 Aug
yes, we also worked hard on this and have quite some measures around fee negotiation to protect users. it eats a lot of resources :) it's also a bit of a balance depending on the channel partners and how "trusted" those are. some implementations are rather strict which does not make sense in a LSP context. this case was even another edge case...
reply
and they FC on you
Well, technically - you FC on them here. Automatically, but still, it's a local FC.
reply
0 sats \ 1 reply \ @jp305 22 Aug
Alby force closes self hosted LDK channels????
reply
We hate force closures as everybody else. Although they can protect users. That's why they exist. Step by step we are able to reduce the probability of these events. On top Alby Cloud subscribers receive new channels.
reply
another case of "not your keys". chain fee spikes break channels between implementations as they cannot agree on commitment fees ((
reply
LDK is holding your own keys though. more like not your own channel management?
reply
21 sats \ 1 reply \ @jp305 22 Aug
Small channel issue?
reply
In this case, due to such a rapid jump in fees, there was a big difference between fee estimates for different block confirmation targets, and different node implementations used different confirmation targets for the fees.
We have a workaround in place for Alby Hub as we run a blended fee estimator, so this particular force close issue will not happen again.
I don't believe it's a channel size issue, and Alby Hub users have full control over their channel management. You can open channels with whoever you want. If you decide to buy a channel with an LSP, then yes we help users there to make things simple to get started.
reply
On-chain fees are back to 3sat/vbyte now.
reply
Hey Felipe. Do you remember what the network fees were when you opened this channel?
reply
hmm I don't remember but I think it was unusually high
reply
Thatโ€™s what it looks like. I wish there was a warning for you to wait for fees to come down. Folks on Nostr think you paid way too much. But you live you learn right.
reply
Electrum and Zeus might be more reliable than Alby. Its more than 60 USD I cannot even justify my suggestion.
reply
So sad ๐Ÿ˜”
reply
Have you been affected? Let us know how we can help. Alby Cloud subscribers receive new channels.
reply
Just had the same happen to me
reply
21 sats \ 0 replies \ @Alby 22 Aug
Due to this huge onchain fee spike a few users saw channel force closures. This is a normal protective measure by the lightning implementation and the sats will become available in the savings balance. Alby Cloud subscribers will receive a new payment channel thanks to the collaboration with our LSP.
reply
stackers have outlawed this. turn on wild west mode in your /settings to see outlawed content.
deleted by author
reply
Can you elaborate, please? Maybe pointing me to a documentation somewhere
I don't have much experience managing LN channels
reply
deleted by author
reply
It's the AlbyHub desktop app on my linux workstation
I installed it last week, followed the getting-started steps and kept it running until today
reply
Iโ€™m using their managed service to test and not self-hosting, and got the force close today also
reply
It is a balance between using force closures as a protection mechanism and minimizing them. Did you receive a new payment channel?
reply
deleted by author
reply
yes. that fee spike was brutal and caused an issue with one of the used LSPs.
reply